MD-Textil MGS Harness Leg Loops

Leg loops MGS (modular belt system)

Combine the MGS Leg Loops (shown in Red) with the Jed Belt MGS and you can upgrade to a tactical rappelling seat in accordance with EN12277-C.  Yhis can be done in seconds and you don't have to fiddle with a rope loop or the like. 

To install the leg loops, the belt is opened and the rope loop pushed onto it, then the two 25mm Cobra buckles on the thighs are closed so that the belt can be put on quickly even when the leg pockets are full and the size only has to be adjusted once.
On the back of the leg loops there are suspenders that prevent slipping while walking. These are attached directly to the belt using the quick-release adapters supplied or, for example, in the Molle system of a modular belt. 

The leg loops have a 6mm thick padding to allow a certain level of comfort even with compact dimensions, in the rear area the 25mm webbing fans out to a width of approx. 45mm and supports the load transfer. 

The leg loops come in a universal length and have enough adjustment range. The excess lengths to adjust are sewn twice, so you can grip them safely even with gloves and the supplied rubber loops fix them securely to the belt. 

To create an integrated harness and battle belt, us the MD-Textil MOLLE laser-cut Combat Belt which is purpose designed as part of the system.

The leg loops are certified in the following combinations:
Stiffened in combination ONLY with MD-Textil Jed Belt MGS: EN12277 type C seat belt 
In combination ONLY with the MD-Textil chest belt MGS EN12277 TYPE A, a complete harness AND EN361 full body harness is created.
If the belt is worn in the modular belt in one of the cases, the EN358 as a holding belt is reached in parallel.

Weight:     335 grams

Colours:    Black, Coyote, Olive / Ranger Green

NOTE: THIS PRODUCT IS DELIVERED IN 2-3 WEEKS FROM ORDERING.

Belt Made in Germany, buckles Made in Austria.